SunnyCal Solar Electric, Solar Hot Water, SOLARTRON ENERGY SYSTEMS INC. 209 256 2300

Serving Northern California for Commercial solar, Commercial solar electric,Commercial solar hot water, Residential solar electric,Residential solar hot water. Lic #867376

Home
Commercial solar
Commercial Solar electric
Photovoltaic 101 Basics
Solartron Energy
Solar 101 Hot water
Center For Sustainable En
Solar Hot Water (CSI-Ther
Pricing solar hot water
Pool Pricing
Solar Space Heating
Testimonials
About Us
Contact Us
Tax Credit
Solar Air Heating
Federal Legislation
Solar Energy
PGE rebates
Communties We Serve
Solar Rebates
Project Portfolio
Renewable Energy Certifi
Energy Management

 209 2562300    

    Shipping in Northern California

Heliodyne                                                Solar Water Heating   #1

The Heliodyne Cool Climate Solar Water Heating Packaged System is designed to operate in all regions, especially where hard water or freezing is an issue. If your region is prone to freezing, then a Closed Loop system is required. In this system, special heat transfer fluid is used to transfer heat instead of water. This process protects your system from burst pipes during the winter or cold nights. Closed Loop systems are also recommended in areas where the water is hard because mineral deposits can eventually clog the pipes.


Features
• “Plug & Play” installation
• All components included (less piping & storage tank)
• Can often be mounted to existing hot water tank
• Superior heat-transfer characteristics
• Suitable for all homes and regions
• Fully protected from overheating and freezing

What's Included
• Solar collectors with mounting hardware
• Helio-Pak heat-transfer appliance (with Standard Delta-T controller)
• Expansion tank
• Glycol (heat transfer fluid)
• DOS discs

Storage tank NOT INCLUDED.                            

 

How It Works

(1) When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. (2) Heated solar fluid is then circulated from the collectors, (3) through the heat exchanger, where its heat is transferred to (4) water in the storage tank. (5) The solar liquid is then pumped back to the collectors to once again be reheated. This circulation loop will continue as long as there is heat to be drawn from the collectors. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water.

 


 

System Specifications

Systems come with the appropriate flush mount hardware. Rack mount hardware is available at an additional cost.
Storage tank NOT INCLUDED.

Description
Size
Gobi Collectors
Helio-Pak

RECOMMENDED
Storage Tank

Included Components
     standard                 pakage 
(1-2 People)

Qty. 1
GOBI 406 001
26.94 ft2

HPAK 016 000
Qty. 1
80 gal  
  • Controller (Delta-T)
  • Expansion Tank (2 Gal.)
  • DOS Discs & Air Vent
  • Glycol (3 Gal.)

 
           

 

 

 

 

                                                                               

 

Heliodyne
Solar Water Heating 

The Heliodyne Cool Climate Solar Water Heating Packaged System is designed to operate in all regions, especially where hard water or freezing is an issue. If your region is prone to freezing, then a Closed Loop system is required. In this system, special heat transfer fluid is used to transfer heat instead of water. This process protects your system from burst pipes during the winter or cold nights. Closed Loop systems are also recommended in areas where the water is hard because mineral deposits can eventually clog the pipes.


Features
• “Plug & Play” installation
• All components included (less piping & storage tank)
• Can often be mounted to existing hot water tank
• Superior heat-transfer characteristics
• Suitable for all homes and regions
• Fully protected from overheating and freezing

What's Included
• Solar collectors with mounting hardware
• Helio-Pak heat-transfer appliance (with Standard Delta-T controller)
• Expansion tank
• Glycol (heat transfer fluid)
• DOS discs

Storage tank NOT INCLUDED.                        

 

How It Works

(1) When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. (2) Heated solar fluid is then circulated from the collectors, (3) through the heat exchanger, where its heat is transferred to (4) water in the storage tank. (5) The solar liquid is then pumped back to the collectors to once again be reheated. This circulation loop will continue as long as there is heat to be drawn from the collectors. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water.


 

System Specifications

Systems come with the appropriate flush mount hardware. Rack mount hardware is available at an additional cost.
Storage tank NOT INCLUDED.

Description
Size
Gobi Collectors
Helio-Pak

RECOMMENDED
Storage Tank

Included Components
     standard                 pakage                             
(2-4 People)

Qty. 2
GOBI 406 001
53.88 ft2

HPAK 016 000
 Qty. 1  80 gal
 
  • Controller (Delta-T)
  • Expansion Tank (2 Gal.)
  • DOS Discs & Air Vent
  • Glycol (3 Gal.)

 

 

 

 

Heliodyne
Solar Water Heating  
  

The Heliodyne Cool Climate Solar Water Heating Packaged System is designed to operate in all regions, especially where hard water or freezing is an issue. If your region is prone to freezing, then a Closed Loop system is required. In this system, special heat transfer fluid is used to transfer heat instead of water. This process protects your system from burst pipes during the winter or cold nights. Closed Loop systems are also recommended in areas where the water is hard because mineral deposits can eventually clog the pipes.


Features
• “Plug & Play” installation
• All components included (less piping & storage tank)
• Can often be mounted to existing hot water tank
• Superior heat-transfer characteristics
• Suitable for all homes and regions
• Fully protected from overheating and freezing

What's Included
• Solar collectors with mounting hardware
• Helio-Pak heat-transfer appliance (with Standard Delta-T controller)
• Expansion tank
• Glycol (heat transfer fluid)
• DOS discs

Storage tank NOT INCLUDED.                        

 

How It Works

(1) When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. (2) Heated solar fluid is then circulated from the collectors, (3) through the heat exchanger, where its heat is transferred to (4) water in the storage tank. (5) The solar liquid is then pumped back to the collectors to once again be reheated. This circulation loop will continue as long as there is heat to be drawn from the collectors. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water.


 

System Specifications

Systems come with the appropriate flush mount hardware. Rack mount hardware is available at an additional cost.
Storage tank NOT INCLUDED.

Description
Size
Gobi Collectors
Helio-Pak

RECOMMENDED
Storage Tank

Included Components
standard                 pakage                
(4-5 People)

Qty. 3
GOBI 406 001
80.82 ft2

HPAK 016 000
119  gal   
  • Controller (Delta-T)
  • Expansion Tank (2 Gal.)
  • DOS Discs & Air Vent
  • Glycol (4 Gal.)

 

 

 

 

 

 

 

 

 

 

 

 

 

Heliodyne
Solar Water Heating  
 

The Heliodyne Cool Climate Solar Water Heating Packaged System is designed to operate in all regions, especially where hard water or freezing is an issue. If your region is prone to freezing, then a Closed Loop system is required. In this system, special heat transfer fluid is used to transfer heat instead of water. This process protects your system from burst pipes during the winter or cold nights. Closed Loop systems are also recommended in areas where the water is hard because mineral deposits can eventually clog the pipes.


Features
• “Plug & Play” installation
• All components included (less piping & storage tank)
• Can often be mounted to existing hot water tank
• Superior heat-transfer characteristics
• Suitable for all homes and regions
• Fully protected from overheating and freezing

What's Included
• Solar collectors with mounting hardware
• Helio-Pak heat-transfer appliance (with Standard Delta-T controller)
• Expansion tank
• Glycol (heat transfer fluid)
• DOS discs

Storage tank NOT INCLUDED.                                

 

How It Works

(1) When there is sufficient heat to be drawn from the collectors, the controller automatically activates the pumps. (2) Heated solar fluid is then circulated from the collectors, (3) through the heat exchanger, where its heat is transferred to (4) water in the storage tank. (5) The solar liquid is then pumped back to the collectors to once again be reheated. This circulation loop will continue as long as there is heat to be drawn from the collectors. During times when there is little or no sun, a backup heating system will be activated to provide adequate hot water.


 

System Specifications

Systems come with the appropriate flush mount hardware. Rack mount hardware is available at an additional cost.
Storage tank NOT INCLUDED.

Description
Size
Gobi Collectors
Helio-Pak

RECOMMENDED
Storage Tank

Included Components
standard                 pakage                
(5-7 People)

Qty. 3
GOBI 408001
107.76 ft2

HPAK 024 000
two 120 gal
  • Controller (Delta-T)
  • Expansion Tank (2 Gal.)
  • DOS Discs & Air Vent
  • Glycol (4 Gal.)

 

 

 

Mounting hardware (including clips) must be ordered separately from individual collectors. Also note that Dyn-o-seal unions with discs are required for installation. Use 2 per array.

Heliodyne Solar Collector
GOBI 406 001   
GOBI 408 001    GOBI 410 001   

Liquid flat plate collectors designed for heating of

  • Domestic and commercial hot water
  • Homes, Offices, Warehouses
  • Pools, residential and commercial
  • Industrial process water
  • Waste water
  • Cooling with absorption chillers

Description

Over 30 years of design and engineering refinement have gone into making it a world-class performer for heat output, efficiency, and durability. The collector is available

in three sizes making it suitable for all types of solar heating applications. The GOBI collectors, like all Heliodyne products, are U.S.-made.

Features

• Low-profile tapered design for a subtle rooftop presence
• Optimal heat absorption and overall efficiency
• Certified to withstand 50 lbs. per square foot
• Anodized aluminum frame improves durability & rigidity
• No-solder connections with factory installed DYN-O-SEAL unions
• Rated by SRCC and IAPMO as one of the industry’s best-performing collectors
• ABSORBER SURFACE: Blue sputtered coating (Variant 001) provides optimal heat absorption with minimal emission, and is suitable for all types of installations and regions.

Product Code GOBI 406 001GOBI 408 001GOBI 410 001
Gross Surface Area
26.94 ft232.23 ft240.15 ft2
Absorber Surface Area24.91 ft229.94 ft237.48 ft2
Dimensions:81.5" x 47.5" x 3.5"97.5" x 47.5" x 3.5"121.5" x 47.5" x 3.5"
Dry Weight102 lbs.126 lbs.153 lbs.
Fluid Capacity1 gal1.14 gal1.34 gal.


Heliodyne
SOLAR STORAGE TANKS                                                      80 Gal    

                                                              120Gal   

80 & 119 Gallon Solar Storage Tanks

Ideal storage tank for replacement or customized applications.

 

80 gallon tank
119 gallon tank


Features:

  • Glass lined tank
  • Twin 3/4" magnesium anode rods
  • Factory-installed brass drain valve
  • Pre-installed ports for interconnecting multiple tanks (119 gal. only)
  • 2" Non-CFC foam insulation (R-16)
  • Steel external jacket

 

 

 

 

Model Number
Gallon Capacity
Approximate Shipping Weight
HSTG 080 000
80
240
HSTG 119 000
119
350

 

 

 

 

 

 

 

Heliodyne
Helio-Pak Heat Transfer Appliance (CLOSED LOOP)

The Helio-Pak (HPAK) is an all-in-one heat-transfer appliance assembly, specifically designed to simplify solar hot water systems and provide maximum heat transfer. The HPAK comes factory assembled and wired with all necessary components, making installation a trouble-free experience. A major benefit the Helio-Pak provides is that it attaches directly onto the hot water tank. As a result, under certain conditions, the HPAK can be mounted onto a pre-existing water tank, thereby reducing costs. This is a feature no other solar hot water heat-exchanger on the market can offer.

Note: This appliance cannot be used with existing gas or propane heaters, unless they have an electrical ignition! If the gas heater has an electric ignition, then the Helio-Pak PRO appliance can be used.

Features

• Augmented heat exchanger surface promotes maximum heat generation
• Superior heat transfer via unique counterflow design
• No new tank needed; mounts to existing tank
• “Plug & Play” installation
• Viewable heat exchanger leak detection
• Several sizes available for differing loads

The Helio-Pak comes assembled with:
• Double-wall external heat exchanger with leak detection
• Delta-T controller w/ sensors
• Pressure relief valve
• Expansion tank
• Pressure gauge
• 2 combo valves 1 check valve, 1 ball valve, and 1 thermometer
• 2 Pumps

 

.                                     

 

 

                                                                             

Model
Heat transfer rate (BTU / hour1)16,00024,00032,00048,000
Recommended Flow Rate2 (GPM)3469
Max Collector Surface Area (ft2)96160200321
Recommended Pump Speed (Energy Use)1 (60W)2 (90W)2 (90W)3 (110W)
Max Piping Resistance3 (ft of Water)2567
Weight (lbs)55657590
Expansion Tank2 gal. 2 gal. 5 gal. 5 gal.
Voltage110 VAC, 60Hz 110 VAC, 60Hz 110 VAC, 60Hz 110 VAC, 60Hz

 

 

                                      

 

 

Phone 

                         209 256 2300